Replies to This Discussion

Permalink Reply by BrianQ. on October 2, 2019 at 8:13am

This may be a good place to look? Also try the Search box way up top, you may get lucky. https://cigarboxnation.com/group/oilcanguitars

• ▶ Reply

Permalink Reply by A.D.EKER on October 7, 2019 at 11:01pm

Some pis of mine BCB can Guitar

• ▶ Reply

Permalink Reply by Road Rash Roy on October 8, 2019 at 4:14pm

Mine started off as a banjo build.  I followed a youtube video by rpeek called "how to make a gas can banjo".  

But I didn't have an old banjo neck (as is suggested in the videos) so I used a 1x2 cbg neck.  And...that didn't really work for a banjo, so I converted it to 4 string electric guitar.

I don't have any pictures of the build process, but I recall some solutions I had to come up with:

I had to eyeball a slight neck angle on the neck thru design and it required cutting and overlapping a section of the 1x2 and creating a heel to get that to work.   I anchored the neck to the handle side of the can using some angle bracket/heel anchors from cbgitty.  

Then I had to cut out the bottom of the can in order to construct some bracing under the bridge (the aluminum can will crush into itself under string tension) and cut a new bottom out of a cigar box lid. I used a large bolt thru the bottom of the can to anchor that end of the neck. 

I mounted a flat humbucker pickup to the top and used a bolt for the bridge/saddle.

Turned out pretty good, I think:

https://www.youtube.com/watch?v=u5dWKyQyix4

• ▶ Reply

Permalink Reply by Paul Craig on October 13, 2019 at 8:41pm

I made one a couple years ago and thought I posted a thread about it, can't find it. I do have pics of the build process if your interested. Here's a link to a build thread I posted on the TDPRI Guitar Forum if that helps.

www.tdpri.com/threads/gas-can-cbg.585802/

• ▶ Reply