Replies to This Discussion

Permalink Reply by Taffy Evans on November 14, 2018 at 11:21am

Hi, what's a slider lid? have you got a photo.
Taff

• ▶ Reply

Permalink Reply by BrianQ. on November 14, 2018 at 12:30pm

like a wine box, lid slides in & out on a channel 

• ▶ Reply

Permalink Reply by Taffy Evans on November 14, 2018 at 12:42pm

Thanks BrianQ. Looks to me like you could cut the box down the centre, (you know where I mean) making two boxes. Of course you'll need two of everything else. Let your imagination run wild, cos' you have a spare.
Taff

• ▶ Reply

Permalink Reply by Tom T on November 14, 2018 at 12:43pm

Glad someone else asked this..........

• ▶ Reply

Permalink Reply by BrianQ. on November 14, 2018 at 1:20pm

I think Dave Lynas has done a few wine box cbg’s? 

• ▶ Reply

Permalink Reply by Kigar on November 14, 2018 at 1:39pm

I thought about using one with the lid open a bit to form sound holes, and attaching the strings to the overhang.  Never got to it though.

• ▶ Reply

Permalink Reply by JL on November 14, 2018 at 11:58pm

Make that WOODCHUCK brand the headstock end of the through-neck, and you can just slide on that soundboard lid across the tail.

• ▶ Reply

Permalink Reply by Over The Edge on November 15, 2018 at 3:14am

What's a slider lid?

• ▶ Reply

Permalink Reply by Taffy Evans on November 15, 2018 at 10:13am

Check the photo.....

• ▶ Reply

Permalink Reply by Hans on November 24, 2018 at 11:47pm

On the wine box guitar I built a while ago I removed the part of the sides that was protruding over the lid so that the top of the sides and the lid were flush (very easy to do with a little block plain). This left me with a perfect rabbet on three sides of the box....

• ▶ Reply

Permalink Reply by Brent Kasl on November 25, 2018 at 4:28am

Got it

• ▶ Reply