I've been without my workshop for almost a year now and am finally close to having it back! I promised my brother-in-law a CBG for his birthday last summer and am getting ready to start on it. 

I've got my box picked out and I picked up a neck and fretboard from CB Gitty and am starting to plan the build out (side question: how much planning to most folks do on their builds? My first three were pretty seat-of-the-pants, on-the-spot stuff but I'm trying to really diagram this one out and build it to a plan).

My question is this - what are the relative merits of either using a separate fretboard attached to the neck, vs. just fretting the neck itself? (This is of course ignoring unfretted necks or necks with frets just marked). It occurred to me when I was trying to get the neck flush with the top of the box that the fretboard would then be raised above the top of the box, which then got me to thinking about why have a separate fretboard at all? I mean, I like 'em and they can be quite pretty...but what's the benefit of that vs. just fretting the neck itself?

Views: 334

Replies to This Discussion

Hey Sean.

As far as I'm aware folk use fretboard for these instruments because they're mostly a stick in a box and for ease of use rather than notching out a whole load of neck. For one it adds height above the box which means more room for the fingers to pick. Also for strengthening the neck with the extra thickness. Then you've got the aesthetics like you mentioned. Plus, make a mistake on a fretboard and all you got to do is replace the fretboard rather than a whole neck.

On factory guitars I guess fretboard are also necessary for hiding truss rods.

If you fancy fretting the neck and it's sufficiently thich I see no rules that have to be adhered to. After all, it's your build, right?

Have fun and all the best to you.

Bear :0)
First congrats on getting your shop back. I dread moving in a few years I’ll go what you’ve been through.

My 2 cents worth - I put a lot of work into my head stocks and necks. If I then screw up the fret slot cutting, that’s work down the drain. Yes I have screwed up fretboards cutting slots but that was just the fretboard - my neck board was still good.

Drilling fret dots is easier on the fretboard - it’s flat. I’m curious also to hear what others do.

As to planning - I diagram everything - the box, the neck board - with dimensions - I find it is keeping surprises and rework way down. I’m currently on build 14.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->