You *can* fret directly onto your neck piece of wood.  Notice Shane's fretless builds, he burns fret markers directly into the neck wood, and strings her up!  Frets aren't going to weaken the wood.  If you use a round over bit on a router to shape your neck, then put on a fretboard ... and 3/4" thick neck, with a 1/4" fretboard makes a big fat 1 inch thick neck!  Not everyone likes baseball bats for necks. 

Views: 354

Reply to This

Replies to This Discussion

No, it's not necessary but two or more pieces laminated together should be much less likely to bow or twist than a single piece of wood.

A fretboard is rarely a necessity on a 3 or 4 stringer, but along with rigidity, it presents options re action  height, and much more, you can play with the contrast of different timbers etc, but overall ,it gives you the best chance of minimising distortion, and a better chance of sitting for a few months and just needing a tuning tweak to play, Shane's fretless builds are as you say fretless, with enough height it could be a banana, and Shane could make it sound ok, but it's nice to pick up a guitar that's been neglected for a few months, tweak the tuners 1/2 a step and play

Hi, couple of things not mentioned yet.

It depends on the timber used for the neck.

A fingerboard timber is normally denser than the neck and can provide provide stability and better holding power for frets.

Im not sure if adding a fingerboard adds more depth to the neck, making it clubby, because I would have to add that much more thickness to the neck timber, for stability.

And maybe less than firm fitting frets in their slots or, a soft neck timber, could allow the neck to compress under string pressure and bow up, over time.

Just things I weigh up before building.

Taff

I've never seen the need for a fretboard on a CBG, most of the ones I've made are with broom handles or lengths of 2x1, rigidity is never an issue and all that is needed is a slide to actually play the thing. the only time frets and a fretboard come into play is when I use a second hand 6 string neck for one of my builds and even then, the slide is still a good option, it just suits the style of guitar.

I actually use both methods, cutting frets directly into the neck, and cutting into fret boards. I've had no problems with bowing or twisting thanks to laminating the neck. I think it's easier cutting accurately into a fret board using my jigs, however I love the look of the fretted neck.

Attachments:

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

Latest Activity

Glenn Kaiser posted photos
1 hour ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Da Do Ron Ron: 3D Printed Cigar Box Guitar

"Glad to put a smile on your face BrianQ! This one is a fun one to sing and play."
1 hour ago
BrianQ. liked Doug Thorsvik's video
2 hours ago
BrianQ. commented on Doug Thorsvik's video
Thumbnail

Da Do Ron Ron: 3D Printed Cigar Box Guitar

"Another great oldie I thought I’d never hear on cbg!! :)"
2 hours ago
Doug Thorsvik posted a video

Da Do Ron Ron: 3D Printed Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 198th Zoom Mtg 04/15/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG Songbook.pdf...
5 hours ago
Matthias Bichsel left a comment for Moritz Voegeli
"www.cbguitars.ch auf FB This Bichsel"
yesterday
Matthias Bichsel left a comment for Moritz Voegeli
"Hallo, ich bin aus Solothurn. Lisa Stearns hat mich gefragt ob ich Dich kenne. Ich baue cbg. Gruss…"
yesterday
Matthias Bichsel liked Moritz Voegeli's profile
yesterday
BrianQ. left a comment for John Herrick
yesterday
BrianQ. left a comment for Daniel Cook
yesterday
BrianQ. left a comment for Skip Novakovich
yesterday
T-Gripped liked David Woodman 's photo
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->