I've just finished a CBG with 2 mini humbuckers. The neck pup is much louder than the bridge pup. The neck pup measures 6.7K and the bridge pup measures 7.5K. I wired with a master volume/master tone so after the selector switch both pups share the same circuit so it's not a pot or the jack connections. I'm no electronics expert but my understanding is the higher the impedance the "hotter" (louder) the pup is. Am I wrong? Any suggestions?

Views: 435

Replies to This Discussion

Neck pups are generally louder because the strings are moving/vibrating much more nearer the middle of the string. Most people ballance the volume from the controls but you can also lower the pup down so that the strings are further away from it. This would drop the volume. You could reverse this and bring the other pup up closer to the strings.

Solid info and advice again Fomhorach. I'm yet to encounter this issue but I'm also yet to put more than one pickup on a build. Your info will prepare and help me too. Thanks muchly! 

Thanks for the response Fomhorach. What you say makes perfect sense but I think in this case it's more than that. I'm well aware that the neck pickup gets more vibration which is why I put the supposedly "hotter" pickup in the bridge position. I also set the bridge pup much closer to the strings. It's about .1" away from the strings while the neck pup is .2" away. Still the neck pup is much louder. I can't balance them with the control because they share a master volume.

There's other things to consider too. If one is drowning out the other, or making eq unbalanced check that you have used both pickups live out because reversing the pickup can cause frequency cancellation. Try reversing one of them as well. Not the wires but the whole thing just flip the left to the right.

After that I can't think of any more quick tricks.

Some electrical oddness can be fixed by the use of diodes (I think it's diodes, someone jump in here with the right way this is done)
Inserting a diode limits the signal direction to stop cross chatter between pickups on the one circuit.

Yes, I would suggest the same thing as an easy fix. Adjust the height of the pickups up or down until you get the loudness balance you want. 

There are some other things that can affect loudness such as the strength of the magnets, and number of winds, but it's easier not to mess with that. 

Could also be a pickup with a weak magnet or defective coil. If pickup height doesn't help and it's wired properly, you need to return it for a replacement.

Is it a 2 wire or 4 wire pickup? Can you take some pics of your wiring?

Sorry, computer problems have kept me offline for a week. I lowered the neck pickup to almost .3" from the strings and left the bridge pickup .1" from the strings and the balance is now pretty good. I love the sound of these pickups but I do think the bridge pickup is a little weak and I have to turn my amp up a bit more than usual. Thanks to all who replied, there are a lot of knowledgeable people in the nation. 

no=one has mentioned it but isn't 3" rather a long way from the strings ? I'd have thought 1/4 to 3/8 a bit more the norm ...

Sorry jabes but I just saw your reply. The measurement isn't 3" but rather 0.3" which is 300 thousandths of an inch which IS between 1/4 and 3/8.

It's not uncommon to have to lower the neck pickup that far down, especially if the 2 pickups are close to each other in output. I have a few that are that way.
I have found that I like the neck pickup to be around 8K to 9K resistance for a neck Humbucker and 11K to 12K resistance for a bridge Humbucker. So it's good to have around 2K more output in the bridge pickup for double coil/humbuckers and 1K to 2K for single coil bridge pickups.
Another thing could be the type of magnets. There's (Alinco 2, 3, 4, 5 and 8), there's a few different strength Ceramic magnets and there's Neodymium magnets. Magnets can make a difference in how a pickup performs. Sometimes the guitar responds to one type better than another. Some people like a mix of pickups like a ceramic in the neck and a Alnico in the bridge. Lots of the cheaper pickups have Ceramic magnets in them, so changing to another type or stronger magnet can be a big change.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Swamp Lion Circuit- 3 P90s!

Started by ILL GREEN. Last reply by David Bowes Jul 31, 2022. 2 Replies

No Volume

Started by Steve Bookout. Last reply by BrianQ. Jun 15, 2021. 15 Replies

External Power Adapter- How To

Started by BrianQ.. Last reply by BrianQ. Jun 23, 2020. 3 Replies

Wiring diagrams

Started by David L.. Last reply by Ray Stanis Mar 24, 2020. 10 Replies

Wickedbucker + Piezo +Volume Jack

Started by Adam Jellison. Last reply by Paul Craig Feb 28, 2020. 9 Replies

Psycho knob install

Started by bizzaro guitaro. Last reply by Paul Craig Jan 31, 2020. 16 Replies

Splitting P-Bass pickups?

Started by John Mark Perchalski. Last reply by Paul Craig Jan 30, 2020. 3 Replies

Output method

Started by Holly Hodson. Last reply by KOOL DOG HOOCH Sep 22, 2019. 5 Replies

Creackle from Volume and Tone pots

Started by Arthur Payne. Last reply by KOOL DOG HOOCH Sep 21, 2019. 4 Replies

Dealing with hum...

Started by James Pobog. Last reply by KOOL DOG HOOCH Sep 21, 2019. 6 Replies

Copper foil tape as shield.

Started by Arthur Payne. Last reply by Arthur Payne May 2, 2019. 5 Replies

Why have a switch?

Started by Arthur Payne. Last reply by ILL GREEN Apr 12, 2019. 3 Replies

Problem with second-hand amp.

Started by Arthur Payne. Last reply by Arthur Payne Apr 1, 2019. 5 Replies

Added the CB Gitty “Psycho Knob”

Started by Tim Pannabecker. Last reply by Paul Craig Mar 8, 2019. 16 Replies

Lipstick pickup and Telecaster neck pickup. What goes where?

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Slow Blues Dani & Ol' Grey Bear Mar 1, 2019. 12 Replies

Wiring CB Gitty Black Ice Single Coil

Started by ILL GREEN. Last reply by ILL GREEN Jan 9, 2019. 5 Replies

Minimal effect from volume or tone pot

Started by Arthur Payne. Last reply by Paul Craig Dec 21, 2018. 9 Replies

Problem posting discussion

Started by Arthur Payne. Last reply by Paul Craig Dec 17, 2018. 2 Replies

Vol, tone, 3 way toggle and 2 single coils?

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Paul Craig Nov 24, 2018. 20 Replies

Latest Activity

smilingdog1 liked 3 String Blues's video
3 minutes ago
smilingdog1 liked Glenn Kaiser's video
5 minutes ago
Doug Thorsvik posted a video

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 195th Zoom Mtg 03/25/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG SOF Songbook...
1 hour ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
18 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
18 hours ago
Kent Thurston updated their profile
19 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
19 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
19 hours ago
Poorness Studios liked A.D.EKER's video
21 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
21 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
yesterday
A.D.EKER commented on A.D.EKER's video
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->