Here is a photo of my latest project. It is a metal bodied resonator. The body is constructed from 26 gauge sheet metal (Home Depot special). The neck is hard Maple with a Walnut fret board.

This is my second resonator project and my first metal body. Learned a lot about shaping and connecting sheet metal.

How does it sound? Exactly how you would expect a metal bodied biscuit resonator to sound. Slightly metallic and very loud.

Fun project.

Views: 1255

Replies to This Discussion

Wow what a challenge, well done. How much will the chrome plating set you back? Ha.

I course sanded swirls into the top and back, then "fogged" some dark gray metallic paint so the swirls peek through. Don't plan to have the body chromed.

Looks great. Did you weld it together?

I did some test welding, brazing and soldering. Finally decided that solder was the most controllable approach. Took around a pound of solder (including the waste). I filed and and sanded the solder after it was together. A little additional solder fill and it looked good.

Brazing worked okay, but welding such thin metal caused a good deal of warping (even with a #0 welding tip). Soldering is strong and basically no warping.

The solder will probably come apart on you soon with all the vibration and not sticking well to steel, it works best with copper due to the surface texture and lower heat. I would recommend brazing with silver solder or brazing with brass.

Did you use a brazing tip or just a regular torch tip?

A small brazing tip will help keep the heat to just the area getting brazed. Tig welding would be good or use a mig welder and spot weld to keep the heat down.

Thanks Paul.

As with most things, time will tell. I think the zinc coating on the sheet metal will help with the solder bond.  I have a small jeweler's torch (The Little Torch) with very small tips available. I like the control it gives.

Several of the DIY metal bodies I found with a google search were soldered, so hopefully, thing will be fine. I'll keep things posted as the guitar ages.

I hope it holds too, I know that had to be a lot of work.

So far, so good. I've been playing "MetalBody" on a daily basis now since December. No signs of cracks or failures of the solder. I'm fairly confident that well executed solder joints are very strong and will hold up for a long, long time. BTW, I just love this guitar. The Reprogle cone sounds amazing and in open tuning with a slide it is all old school. Great project.

Great to hear. Glad your enjoying it.

Another method you could do would be using JBWeld. It sticks to metal and it's sand-able and takes paint well. Holds up good too, my Dad used it to seal a hole in a engine block once.

I've used JB Weld. it really is good epoxy based stuff. If the solder doesn't work out, I think brazing would be plan B.

I used to do a good bit of silver soldering back in the 90's. Love that stuff, told myself that I would never again braze with brass rod. It is a little more expensive though and not as easy to find.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

BO Diddly Tribute Guitar

Started by Paul Craig. Last reply by Paul Craig Dec 15, 2018. 14 Replies

Headless Travel Guitar

Started by Tom T. Last reply by Mike Simpson Dec 10, 2018. 5 Replies

My second build.

Started by Dave Streeb. Last reply by Paul Craig Sep 13, 2018. 3 Replies

New Build: Metal Body Resonator

Started by Tom T. Last reply by Paul Craig Jul 12, 2017. 16 Replies

New to CBG Building

Started by Ken Frederick. Last reply by Ken Frederick Nov 2, 2016. 3 Replies

Started out to build a neck.

Started by Tom T. Last reply by Tom T Sep 4, 2016. 9 Replies

Hello guys looking for advice

Started by Philip Hale. Last reply by J.D. Sep 4, 2016. 5 Replies

My First Six-String Build.........

Started by Tom T. Last reply by Tom T Jul 8, 2016. 8 Replies

Smoked Salmon Gift Box 6-String

Started by Dan Vines. Last reply by Dan Vines May 20, 2016. 6 Replies

Neck sources

Started by Mark Werner. Last reply by J.D. Apr 19, 2016. 2 Replies

My first playable 6 string

Started by Nick Johnson. Last reply by Nick Johnson Mar 14, 2016. 3 Replies

6 String License Plate Build

Started by Paul Craig. Last reply by Paul Craig Jan 25, 2016. 25 Replies

Which Box.............

Started by Tom T. Last reply by doggylv . Oct 8, 2015. 3 Replies

6 String Boxes

Started by Tom Gilreath. Last reply by Bob Marioni Apr 30, 2015. 6 Replies

6 String bridge?

Started by Alex Barrett. Last reply by Dan Vines Feb 3, 2015. 3 Replies

First timer. Wine box resonator: electric possible or not?

Started by George Everet Thompson. Last reply by George Everet Thompson Nov 22, 2014. 5 Replies

reasonably six string

Started by Mal Chilvers. Last reply by Randy S. Bretz Oct 25, 2014. 1 Reply

time to build another 6-string,,,

Started by GARAGE HERMIT. Last reply by GARAGE HERMIT May 26, 2014. 6 Replies

Latest Activity

Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
56 minutes ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
1 hour ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
2 hours ago
A.D.EKER commented on Ricky D's photo
2 hours ago
A.D.EKER commented on A.D.EKER's video
2 hours ago
Keith Rearick liked Doug Thorsvik's video
5 hours ago
Keith Rearick liked A.D.EKER's video
5 hours ago
Keith Rearick liked Doug Thorsvik's video
6 hours ago
Keith Rearick liked Ricky D's photo
6 hours ago
Keith Rearick liked Ricky D's photo
6 hours ago
Keith Rearick liked Ricky D's photo
6 hours ago
Keith Rearick liked Ricky D's photo
6 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->