Replies to This Discussion

Permalink Reply by Cause the Blue rat on June 16, 2016 at 4:08pm

so far it looks like i'll be there! And looking forward to it too. 

• ▶ Reply

Permalink Reply by Cause the Blue rat on June 18, 2016 at 11:46am

Another GREAT meet! 

For those of you who don't have a once a month gathering it's well worth setting up. "Build it and they will come". I live an hour away. And there's folks who drive longer to get there. Our meet is only two hours long. And worth every second. When you do set one up don't plan on anything. Just let it happen. You'll end up with people playing in one spot, talking about builds in another and trying out someone else's builds in yet another spot. Hope to see more of these meets in the nation soon! 

• ▶ Reply

Permalink Reply by gary herget on June 18, 2016 at 2:57pm

I agree with 'ya Rat, every word. So far I think us and Michiganders are the only ones who take the time to have this kind of fun. If their are others make yourselves known!!

• ▶ Reply

Permalink Reply by smilingdog1 on June 19, 2016 at 1:46am

June 18th 2016 Club picture.

• ▶ Reply

Permalink Reply by Cause the Blue rat on June 19, 2016 at 8:05am

The twenty seconds it took to that that pic was the quietest we were all morning. Lots of playing going on. 

• ▶ Reply

Permalink Reply by smilingdog1 on July 14, 2016 at 4:01pm

Working straight through the weekend! Catch you all in August.

• ▶ Reply

Permalink Reply by Scott W on August 3, 2016 at 4:10pm

This might be my favorite of five Egyptpunk and I have on the bench right now -- a soprano uke neck with curly maple headstock.
https://youtu.be/7FbKhg8EWaA

• ▶ Reply

Permalink Reply by smilingdog1 on August 3, 2016 at 4:41pm

Nothing better than a beautiful piece of wood to work with. I could just see a glimpse of the curls in the neck. 

• ▶ Reply

Permalink Reply by Scott W on August 4, 2016 at 8:14am

Much to my surprise, I found that the humidity in my garage, even though its been closed up, caused the shellac to blush. There has been gnashing of teeth as I sand it all down.

• ▶ Reply

Permalink Reply by gary herget on August 4, 2016 at 3:00pm

Been having problems with finishing as well, humdity can really screw things up for you. My workshop has no air just a box fan, need do something about that.

• ▶ Reply

Permalink Reply by Scott W on August 4, 2016 at 4:46pm

Same here!

• ▶ Reply

Permalink Reply by Cause the Blue rat on August 17, 2016 at 3:47pm

Already know I'll be at work this Sat. We have a costumer that's really PO'd and threatening to leave. Company put me in charge of fixing this mess. Hoping to be through all this and there next month. 

• ▶ Reply

• ‹ Previous
• 1
• …
• 44
• 45
• 46
• 47
• 48
• …
• 53
• Next ›
• Page