Replies to This Discussion

Permalink Reply by Fomhorach on June 11, 2016 at 5:56am

I just picked up these today for 79p

Permalink Reply by Toofy Peg on June 11, 2016 at 6:33am

79p for 100!!! Jesus I better get searching lol

Permalink Reply by Fomhorach on June 11, 2016 at 7:31am

I find it harder to find a really nice bridge. The bridge for me is the most critical part of the design, a nice one makes twice the guitar, get it wrong and it can ruin a great build.

I'm always on the look out for bridges. 

Permalink Reply by Toofy Peg on June 14, 2016 at 7:57am

Hi mate I was just want to check if the pic I put up when I 1st made this post showed up? Could you please let me know. thanks

Permalink Reply by David Bowes on June 11, 2016 at 7:44am

They look to have large diameter do you know the dimensions?

Permalink Reply by Fomhorach on June 14, 2016 at 2:38pm

If it's those eyelets I think I drill a 4mm hole for them and they leave a 3mm hole. On the back I usually drill a 5mm hole and insert a small bolt flush with the surface and this has a 2mm hole to hold the string bobble thingy. 

I've seen the pop rivet solution and it looks better. I just tend to use the things I see and happen to grab in various shops I visit. I might order some pop rivets from e-bog for my next build.

Permalink Reply by Toofy Peg on June 11, 2016 at 7:55am

Guys how's do I add a pic to this discussion? By the way I'm on my iPhone

• ‹ Previous
• 1
• 2
• Next ›
• Page