Okay, I have the neck fretted and the body ready to go on my first CB bass. I built it 30"scale from nut to bridge. Going acoustic with a piezo pickup. The question is.....does it matter if I use a longer length string. I know I need acoustic string but does the length matter? I have seen string for 30, 32,34, and 36 inch bass. Any thoughts/help is very welcome. Thanks!! 

Views: 795

Replies to This Discussion

http://www.bassstringsonline.com/Finding-the-correct-string-length-...

I'd never thought about it because all my (commercially built) basses have a 34-inch scale, but, yes, it can make a difference. A 34-inch string on a 30-inch bass won't be pulled as tight to get up to pitch and will have a greater tendency to buzz and "flop around" when plucked.

The guy at the website above also points out some issues. It's not only a matter of how long is your scale, but also a matter of how the strings fit into your tuning pegs.

Thanks for pointing out that there exist different string lengths for sale. (Hey! What do I know?) I think I'll try some 32" strings on my buzzy 34" acoustic and see if the heavier tension will solve the problem.

So the link was great if you are going electric etc. I use a neck through design and the strings will be attached at the tail block. I will have to measure from tail to tuner for overall length. Looks like customer service at JustStrings.com will be getting a call soon. 

As I am not a bass player I am going on instinct here and trial and error can be expensive with bass strings.

I bought one and only one set of bass strings ever and did what sounds like the same process you are going thru.  I'd suggest getting close on the recommended scale length and make sure the overall length is long enough to reach your tail piece and still wrap the furthest tuners a few times.  Bass strings fight you a little bit at the beginning of stringing due to the thickness compared to standard guitar strings so a little extra length helps.

Strings must be matched to scale length for best performance.  It's a tension thing.

Probably not the answer you're looking for, but... use Weedwacker line and it shouldn't matter the scale or "string" length.  I used .115, .90, and .80 for a three stringer I made last year (strings tuned nicely to E,A, and D).

Actual weedwacker strings? Or is that a bass players term for something I dont know about? Do they create a reasonable amount of volume and? I am using a piezo pickup so as long as they vibrate they will amplify I would imagine. So many new questions!?!? 

There are guys on this board that really use weedwacker strings. I hope they'll all chime in with info on thickness, tone quality, etc. Never done it myself, but I'd like to learn how...

Yes, actually Weed Wacker line... sorry for the lack of a reply. I have 3 computers at home and not one of them works right when I click to reply to posts on this site (really stinks and I am not sure what the issue is). Am struggling with replying on a tablet right now.

At any rate... here's a video of the build I am referring to: https://m.youtube.com/watch?v=-MzvKYqVkgI

Acoustically it's not very loud, but neither is an electric bass (and it's about as loud as that... loud enough to hear the notes, but not loud enough to play without amplification. I used 2 piezo discs wired in series.

Again, sorry for the late reply, but hopefully this helps. Good luck!

Oh, and email/message me here with any questions. I seem to have better luck replying to messages than forums.

Uke players use the acoustic guitar version of the Behringer Bass Driver to get the volume and range they need to plug their passive piezo ukes into an amp.  Can save a lot by only having to build passive systems since they all would plug into this.

http://www.amazon.com/BEHRINGER-V-TONE-BASS-DRIVER-BDI21/dp/B000KIPUQG

I've been very pleased with the Behringer "Acoustic Guitar Driver" as a booster for guitars. Pay one time; use on everything.  Looks like the price is right on the bass unit. Many thanks for the tip.

I'll chime in with some bad info: because in CBB there are no rules right?  :D

 I just built a 3 string neck through with a 24" scale. (I did run strings through to bottom of box to try and keep as much length as possible. 2" behind bridge and 2.5" through the box. So base of string to nut is 28")

 I used ADG strings that came off my 35" scale bass.

 It tuned up to ADG just fine and the strings have good tension (maybe a bit tight). It plays well and resonates great, also electric (piezo) and runs through an amp fine.

 So I think it's less important to get the perfect scale length than generally thought. This was an experiment so I wasn't sure but I am having no issues with 'wrong' length.

 I did however use the adg because the thickest part of the A which I had to put through the tuner was the largest string that would fit (uke tuners). The E was too large for that. Bass tuners are 3x the price... ah compromise.

 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cigar box a little different

Started by Phil Farabough. Last reply by Phil Farabough Nov 10, 2018. 10 Replies

first bass build

Started by Patrick. Last reply by BrianQ. Nov 8, 2018. 6 Replies

looking for alternate tunings-

Started by Daniel Walter. Last reply by Ken Hutchinson Oct 14, 2017. 16 Replies

Bass build help

Started by Ro'Nique Staley Mar 22, 2017. 0 Replies

My first bass build

Started by Bryan Putnam. Last reply by Richard Haas Dec 2, 2016. 15 Replies

Building my first bass

Started by Henry S. Last reply by TN Twang Nov 30, 2016. 11 Replies

fingerboard question(s)

Started by Euraquilo. Last reply by Fomhorach Nov 1, 2016. 6 Replies

3 string bass questions

Started by Euraquilo. Last reply by Euraquilo Oct 31, 2016. 18 Replies

3 String Cigar Box Bass Guitar Parts

Started by Will T. Last reply by Murdoc_420 Jul 16, 2016. 3 Replies

Bass strings??

Started by jeffrey ross. Last reply by jeffrey ross Mar 25, 2016. 13 Replies

Magnetic vs Piezo pickup

Started by PhilUSAFRet. Last reply by Murdoc_420 Mar 25, 2016. 8 Replies

Weed eater strings and tuning.

Started by Poppy. Last reply by Murdoc_420 Feb 29, 2016. 7 Replies

Bass Uke string question(s)

Started by Lane Martin. Last reply by Where's Uranus? Jan 7, 2016. 6 Replies

Looking for 2 string bass plans

Started by Mike. Last reply by Mike Jan 6, 2016. 8 Replies

UBass strings

Started by Bobby Fields. Last reply by Bobby Fields Dec 11, 2015. 3 Replies

First bass build got a few questions .

Started by Piht Bull (Delta Dawg Guitars). Last reply by Scott aka Farmer Ted Apr 23, 2015. 23 Replies

bass frets...

Started by john mackay. Last reply by john mackay Feb 4, 2015. 4 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
10 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
10 hours ago
Kent Thurston updated their profile
11 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
12 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
12 hours ago
Poorness Studios liked A.D.EKER's video
14 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
14 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
17 hours ago
A.D.EKER commented on A.D.EKER's video
20 hours ago
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
20 hours ago
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->