Replies to This Discussion

Permalink Reply by jawbone on July 15, 2015 at 2:32pm

Hey Brian - I've made a few LP gits - I put a rubber washer or some kind of spacer under the four screws, generally, I have found any buzz is from the plate hitting a section on the box or neck. Your Maine plates look alot like our Ontario, Canada plates. 

• ▶ Reply

Permalink Reply by Brian Wentworth on July 16, 2015 at 2:36am

Thanks. That's what I was thinking. I put some washers under the screws but it still buzzed. The only way I could stop it was to replace the metal bridge with wood but then it really dulled the sound. I put extra screws around the plate and went back to the metal bridge. It s pretty good now. We'll see what happens.

• ▶ Reply

Permalink Reply by gary herget on July 15, 2015 at 4:34pm

Hey Brian, I might be up for a trade got lots of MO plates from the 60's on up, send me a message.

• ▶ Reply

Permalink Reply by Brian Wentworth on July 16, 2015 at 2:40am

Hey Gary. That would be cool. My plates aren't that old though. They're all from the 2000's but I have farm, trailer, and commercial plates. Let me know if you're interested. Thanks.

• ▶ Reply

Permalink Reply by gary herget on July 17, 2015 at 12:23am

I'll get a pic of some I have and send it to you and see what you think.

• ▶ Reply

Permalink Reply by Brian Wentworth on July 19, 2015 at 2:28am

Okie dokie. I an send you some pics too.

• ▶ Reply

Permalink Reply by John Sawyer on July 17, 2015 at 11:58am

I found that if you put a nut against the head on a 1/4" bolt, the screw head contacts the lid, and the nut just vibrates... A drop of superglue on the threads fixes it...

• ▶ Reply

Permalink Reply by John Sawyer on July 17, 2015 at 7:30pm

Oh, and I have a couple of recent CA plates, I'd be willing to trade...

• ▶ Reply

Permalink Reply by CS LeBeau on July 18, 2015 at 9:20am

I have a couple AZ '70's plates I'd trade.

I like that buzz,its part of the fun of a plate'r.

sorry if I'm talking ish,but I have one from the 20's,plus a bunch of 60's/70's.

• ▶ Reply

Permalink Reply by Brian Wentworth on July 19, 2015 at 2:30am

True. I find that a certain amount of buzz does add to it. It almost sounds like distortion. Sometimes,though, all I can hear is the buzz and drives me nuts!
I can get a pic of the plates I have up and then let me know if you're interested in a trade.

• ▶ Reply

Permalink Reply by John Sawyer on July 19, 2015 at 4:38am

It sounds to me like we need to setup a larger exchange...  Though I think Brian would get first dibs...  If everybody is interested, I could setup a spreadsheet on Google Docs..  It would be unmoderated, so there's some risk, but I have seen it work on other forums.  The basic rules would be:  Somebody would add a seed item to the list, (I could do that). and be willing to ship it somewhere in the USA for free.  Once that item was shipped, The recipient would add one to the sheet, and somebody would claim it.  The cycle would then repeat.

In my case, The seed unit would be free, with no expectation of a return, so I'd claim my first, and ship a second plate...  

I would NOT be moderating the list... it would have to run as a thread with community policing and cleanup...  Thoughts?

• ▶ Reply

Permalink Reply by Brian Wentworth on July 21, 2015 at 7:41am

Here are the plates I have for trade. Anyone interested?

Attachments:

• image.jpg, 1.5 MB

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page