Hello folks, I have a question for the best group of people to ask.

 First question - I'm building my first 30 " scale , 2 string bass. And I need help with 

the action at the first fret,  and the 12th ?

Second question - I have a few packs of 4 string bass, and 6 string bass,  which strings do I use ?

Views: 489

Replies to This Discussion

the answer to both questions is...."depends"...

 

If you're using jumbo/bass frets, I like twice the height of the frets crown at fret 1 and double that at fret 12.  if for some reason you're using smaller frets, you can lower these #s slightly.

 

as to which strings to use on a 2 string bass, if you're playing ensemble, I'd probably choose the top 2 (biggest gauge) strings for a stronger low end...if you're doing solo work, I'd probably choose the bottom 2 (lightest gauge) strings to have a little "treble" in the instrument....for general use, I'd probably choose the middle 2 strings. 

 

The thing about "no rules" is that I allows a lot of flexibility, but demands some thoughtfulness as to how we envision our use of the CBG we're building.

 

Hope that my non-answer helps.

Thank you Wichita Sam. Now I have am idea of what to do.

The one I made I used the E and A strings.  Most songs don't go below the E and you can still get to most of the higher notes on the A.  I haven't found much need to go higher.  

Ballpark not knowing anything else about the neck (relief/radius/etc,) for starters I'd set it between 7/64ths (2.8mm) and 5/64ths (2.0mm) at fret-17 depending upon the string size and how hard you play. This is the most common or "Fender" spec. There are other opinions about how to do it however that you can read here.

FWIW, the ultra critical factor to get correct when adjusting string height is the amount of relief (or bow) in the neck. That sometimes requires a truss rod adjustment. Neck radius is also a factor. But since most CBGs have flat or "zero radius" fingerboards, radius becomes less of an issue in one respect. But it makes the neck relief even more important.

I also really like Wichita Sam''s recommendation about setting string height based on the fret crown height. HAdn't thought of it that way before, but it makes a good deal of sense if the neck is reasonably straight.

Which strings to use? Any two tuned a fourth or fifth apart. So BE EA AD DG GC would be natural choices. If you want to see how much you can do using basically two open notes (in this video the bass is tuned CGCG with strings from a piccolo bass set which is tuned one octave above normal tuning) check out this video.

nice paying! although its not "really" a bass tuene you are playing, its more like a normal e-guitar tuned a bit high. >> thats just for the record. Greez Jack from Switz

As a bass player, I would go with a E and A tuning since that is where I spend 90% of my time when playing my Commercial Electric Bass Guitars. That would make it much easier to go between your CBB and a commercial Bass.

At 30" that is a short scale bass. standard 34" scale strings on a 30" scale would be about like putting a capo at the 3rd fret. 

The E and A strings for a 34" scale bass tuned to E and A on a 30" scale will feel kinda floppy.  the D and G for a 34" tuned to E and A on a 30 " will feel about  right but that gives you a more tenor sound like the E & A on a guitar.

You could use the B and E from the 34" 6-string pack, on a 30" scale tuned up to E and A will be about right also, the neck will need to be up to the challenge though, that B string is thick as a power line.

Or you could buy individual short scale strings from your neighborhood store.

I'd recommend springing for a short scale bass string set rather than cutting down a 34" set.

Using a long set on a short scale will result in the windings getting cut and starting to slip eventually. That's because they're not intended to 'break' over the slot on a tuning peg. The old saying "if it's off the silk wrap it shouldn't be around the tuning peg" is generally good advice.

Only drawback is that short-scale string sets run about $5 to $10 more on average than a long-scale set. Lower sales volume equals higher prices I guess.

You can buy single strings rather than full sets and save some money if you shop around. Many of the online string speciality sites have single strings available. D'Addario offers "shorties" for most of its bass product line. Take a look here for one example of what's available.

Cheers!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cigar box a little different

Started by Phil Farabough. Last reply by Phil Farabough Nov 10, 2018. 10 Replies

first bass build

Started by Patrick. Last reply by BrianQ. Nov 8, 2018. 6 Replies

looking for alternate tunings-

Started by Daniel Walter. Last reply by Ken Hutchinson Oct 14, 2017. 16 Replies

Bass build help

Started by Ro'Nique Staley Mar 22, 2017. 0 Replies

My first bass build

Started by Bryan Putnam. Last reply by Richard Haas Dec 2, 2016. 15 Replies

Building my first bass

Started by Henry S. Last reply by TN Twang Nov 30, 2016. 11 Replies

fingerboard question(s)

Started by Euraquilo. Last reply by Fomhorach Nov 1, 2016. 6 Replies

3 string bass questions

Started by Euraquilo. Last reply by Euraquilo Oct 31, 2016. 18 Replies

3 String Cigar Box Bass Guitar Parts

Started by Will T. Last reply by Murdoc_420 Jul 16, 2016. 3 Replies

Bass strings??

Started by jeffrey ross. Last reply by jeffrey ross Mar 25, 2016. 13 Replies

Magnetic vs Piezo pickup

Started by PhilUSAFRet. Last reply by Murdoc_420 Mar 25, 2016. 8 Replies

Weed eater strings and tuning.

Started by Poppy. Last reply by Murdoc_420 Feb 29, 2016. 7 Replies

Bass Uke string question(s)

Started by Lane Martin. Last reply by Where's Uranus? Jan 7, 2016. 6 Replies

Looking for 2 string bass plans

Started by Mike. Last reply by Mike Jan 6, 2016. 8 Replies

UBass strings

Started by Bobby Fields. Last reply by Bobby Fields Dec 11, 2015. 3 Replies

First bass build got a few questions .

Started by Piht Bull (Delta Dawg Guitars). Last reply by Scott aka Farmer Ted Apr 23, 2015. 23 Replies

bass frets...

Started by john mackay. Last reply by john mackay Feb 4, 2015. 4 Replies

Latest Activity

BrianQ. commented on Dar Stellabotta's video
3 hours ago
BrianQ. liked Dar Stellabotta's video
3 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
6 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
6 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
7 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
7 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
9 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
9 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
10 hours ago
A.D.EKER commented on Ricky D's photo
10 hours ago
A.D.EKER commented on A.D.EKER's video
10 hours ago
Keith Rearick liked Doug Thorsvik's video
14 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->