I want to put a stationary bridge one the face of the ukulele I am building.  Do I need to be concerned about "intonation" if I put the bridge at the fret scale I specified?  I don't know much about this, my son was the on that brought it up.  He plays guitar.

Views: 304

Replies to This Discussion

Ya, you should have some "compensation" at the bridge. There is a great fret calculator by Stewart McDonald that can give you a pretty good approximate for compensation at the bridge. It's worked for me pretty well. Strings, fret height, string height and stuff like that can influence compensation too. 

http://www.stewmac.com/FretCalculator

Yes, Stewart McDonald is the calculator I use.  I'm wondering if attaching the bridge with small screws  through slightly slotted holes to allow for a little adjustment might be worth trying (?).  Although I have read some articles where it says on ukuleles that with nylon strings, and the fret length there will not be perfect intonation, and it is not as big a deal as it is on a guitar.

Thank for the reply.

Well, with the short neck instruments and all intonation is always a problem, never quite perfect. One thing I've done with the cigar box stuff is put down that green tape, set the bridge in place strung up and marked on the tape where the sweet spot is (this is all with a temporary tail piece) and then glued down the bridge on the marks. I use thru the bridge stringing method.On my standard type ukes I've been using the stewmac calc and then building compensation into the saddle. This has been the most accurate for me. I mostly have had to compensate on  the A string and G string on the reenterant ukes

Paul,

When I build mine I always leave the bridge un-attached until I actually string it up and tune it, then I make a small reference mark when I get it right. Most of the time I don't have to remove the strings, just back them off a bit and use something to temporarily keep the strings out of the way until I have the bridge permanently attached (glued, screwed, etc)

Hope this helps.

I love this discussion. I am willing to bet that the cigar box ukes we build have better intonation than most store bought ones. Building by hands, hearts, and minds that care makes a world of difference.

I'm bettin you are right!

"reentrant", thanks, learned a new term, had to look it up.  Always learn something new when I get  on here.  That's a good thing.  I guess one other question, how do you setup a temporary tailpiece?  Doesn't that change things a little?  The strings are going over the saddle at a different angle than they will when they are attached to the permanent bridge.  Maybe that doesn't matter.

Really appreciate the input guys.  I'm a musical dummy.

I set up the "tailpiece" on the strap button hole.

I don't know if it matters....just don't know

 and

you ain't no dummy! Where's one of those smiley things when you need one

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Ukes For Gand kids

Started by Rupe Power. Last reply by Sal Monella Nov 11, 2022. 3 Replies

Gitaulele

Started by Brown Water Jerry (Rice). Last reply by Kigar Mar 21, 2020. 1 Reply

Semi-Uke Kit Build

Started by Brian Revels. Last reply by Brian Revels Oct 6, 2017. 8 Replies

ideal narrow of the box?

Started by jose garcia paredes. Last reply by Kigar Sep 3, 2017. 3 Replies

Steel string advice sought for a chronic head scratcher (me)

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Bob Johnston May 1, 2017. 10 Replies

(CB) U bass help

Started by Kigar. Last reply by Ronald Whitford Apr 6, 2017. 1 Reply

Cigar Box Ukulele group on Facebook

Started by Kentucky Mojo Jan 31, 2017. 0 Replies

Classical Ball end strings

Started by John Hopper Dec 30, 2016. 0 Replies

String choices: nylon vs. steel

Started by Lane Martin. Last reply by gary sheldon Dec 3, 2016. 5 Replies

MDF Box Ukes

Started by Scott W. Last reply by Kentucky Mojo Nov 4, 2016. 7 Replies

My Brothers Christmas Present

Started by George Fitzgibbon. Last reply by George Fitzgibbon Oct 26, 2016. 6 Replies

CBU Avo Uvezian Tenor Uke

Started by Kigar. Last reply by Greg Thompson Jul 8, 2016. 5 Replies

Triangular Concert Uke

Started by Kigar. Last reply by Greg Thompson Jul 8, 2016. 4 Replies

First Build

Started by B. Kirkwood. Last reply by B. Kirkwood Apr 13, 2016. 2 Replies

Assembly Order

Started by B. Kirkwood. Last reply by B. Kirkwood Mar 29, 2016. 3 Replies

Neck length

Started by B. Kirkwood. Last reply by gary sheldon Mar 29, 2016. 3 Replies

reversed tuners on a uke - advise wanted

Started by Kigar. Last reply by gary sheldon Feb 23, 2016. 3 Replies

New to Uke!!

Started by jeffrey ross. Last reply by Habanera Hal Feb 17, 2016. 19 Replies

Great little video!

Started by Wade. Last reply by rusty case Feb 7, 2016. 2 Replies

Fretboard attachment

Started by gary sheldon. Last reply by rusty case Feb 7, 2016. 3 Replies

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->