Don't know if anyone else has tried this or not, but I have found with many of my builds, especially with a neck through design that using 1/8 inch "pop" rivets with the nail knocked out makes an excellent bushing where the string goes through the tail. I use them top and bottom of the tail and are also easy to paint if wanted. A few years ago I picked up a bag of 100 for $1.00. A penny a bushing---not bad.
Tags:
Been using them for a while now, they work great! I bought about 20 big tubs of hardware from a lumberyard that changed distributers and didn't want the old hardware and such, bought 20 large bins of brand new hardware for $50. One of the bins had about 3,500 1/8" rivets in there along with the same amount of 3/16" on up. I should have enough for a few more gits :-)
Those look good I used roll pins
They work great. I always run a drill bit thru them after they have been installed, The small nuts off bicycle spokes are great also, available at eBay or your local bike shop
that's old school
Thanks Randy for the comment but not all of us are "old school"
Yes, I do that too, especially on my more "old-school primitive" builds.
Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies 2 Likes
Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies 4 Likes
Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply 0 Likes
Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies 0 Likes
Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies 0 Likes
Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies 1 Like
Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies 0 Likes
Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies 2 Likes
Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies 2 Likes
Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies 1 Like
Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies 1 Like
Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies 1 Like
Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies 0 Likes
Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies 0 Likes
Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies 1 Like
Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies 0 Likes
Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies 4 Likes
Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies 0 Likes
Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies 2 Likes
Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!