Greetings All!

So I'm building my first Cigar Box Amp and I have a question.  I have some left over foam from some other project years ago, I was wondering if anyone knows if I added some foam to the inside of the box what kind of effect it would have?  I'll probably give it a try, but maybe I'll make it so that the piece can be removed easily, maybe to achieve different desired sounds and tones.  

Anyway, anyone have an idea if I should even bother trying?

Views: 391

Reply to This

Replies to This Discussion

Well for sure it would dampen the sound ....!!! 

BUt would it dampen it in a bad way or just give a different sound?

In a bad way. It will muffle the sound. If that's what you're looking for, might as well stuff a small pillow, a hamster, and some cedar shavings in there, too ;-).
It will seriously dampen the ability of the speaker to move enough air to reproduce whatever sound is amplified through it. Prove it to yourself by stuffing the foam in one of your other amps. There are no commercial amps that I know of that purposely stuff foam into the amp and speaker enclosure. But go ahead and prove it to yourself; you and we both know you're gonna do it, anyway. >:-E

a couple ways to get different sounds from cb amp is with the lid...play closed tight (latch engaged) for clean, unlatch so lid rattles a bit, open lid for brighter sound, and my favorite...open & close lid while guitar strings vibrate for a "wah wah" effect.

That's how you're supposed to use the commercially-made Pignose amp, too...

Thanks guys, your input has been great.  I don't have any experience with amps at all and the idea came to me in the shower.  I suppose I should have let it wash down the drain but figured I'd ask. 

I did get another idea out of this discussion though.  I already planned on building the speaker into the "bottom" of the box, leaving the "top" as a back flap for easy access.  Now I'm thinking I could add a little prop so I can use the amp either closed or open, maybe even different amounts of open depending on where the prop is placed.   Hmmm.

If you've got a Michael's, Hobby Lobby, Lowe's or Home Depot nearby, you can find one of those brass sliding box lid supports ( some are curved, some are straight) to keep the box propped open at whatever angle you want...

Didn't know such things existed!  Thanks, I'll check it out.

On my porch I set my CB amp on a table next to the window and found I get really good tone by pointing the speakers away from me and letting it bounce back off the glass. That said I'll second thesuggestion of playing around with having the lid open/closed ect. and even position.

The ones I've made I've always put the speaker(s) in the bottom to save the art work. I've also found with rubber feet you don't have to have a prop they will stay splayed open pretty well just from the grab of the feet..

What kind of foam?

Although Oily is correct about guitar speaker cab manufactures from my experience, from a audio reproduction standpoint, adding the correct amount of acoustic fill to a non ported, acoustic suspension design will add apparent volume and many times extend LF to the cabinet when using a high Q driver. Using acoustic (sculptured) foam will typically just filter out some HF. Seeing as how most speakers for guitar don't really do HF as such anyway, it may not have much effect whether it be a open or closed design. Thing is though, guitar speakers ain't audio speakers ;)

I'm a big proponent of experimentation, though.   I'd say to give it a shot and find out for yourself what the audible differences are. My guess would be that your results will vary greatly depending on box size, speaker and amount and type of fill used. No harm no foul as long as you keep everything easily reversible.

 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

Latest Activity

Keith Rearick liked A.D.EKER's video
42 minutes ago
Keith Rearick liked Ghostbuttons's photo
46 minutes ago
Keith Rearick liked Randy S. Bretz's photo
48 minutes ago
Keith Rearick liked Crazed Fandango's photo
48 minutes ago
Keith Rearick liked J. D. Woods's discussion Are metal frets necessary?
1 hour ago
BrianQ. posted a status
"R.I.P. Dickey Betts, Thanx for the memories!!!"
1 hour ago
BrianQ. replied to Rich Butters's discussion UK - Best Place to Buy Cigar Box's
"Ever heard of The Godfather of cigarbox guitars? He has a one stop shop store complete with all the…"
1 hour ago
BrianQ. replied to J. D. Woods's discussion Are metal frets necessary?
"Here’s a video, if you’re not into lengthy reads? …"
1 hour ago
T-Gripped liked Ghostbuttons's photo
1 hour ago
T-Gripped commented on Crazed Fandango's photo
Thumbnail

Frethound 4 String

"Cool shot with those wildflowers in the background and your wonderful instrument leaning against…"
1 hour ago
T-Gripped liked Randy S. Bretz's photo
1 hour ago
T-Gripped commented on Randy S. Bretz's photo
Thumbnail

Off the Bench !

"Yowzers! Awesome!!"
1 hour ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->