I started building my first CBG. Everything was going great until I decided to fret the neck. I could not figure out where to space them. I tried numerous web sites and got more confused. I would love some guidance on what I can do. I need to completely build a new neck for my project. I'm bummed out and need help before I ruin the next one.

Views: 16276

Reply to This

Replies to This Discussion

Hi Evan, I've always used the Stew Mac fret calculator: http://www.stewmac.com/freeinfo/Fretting/i-fretcalc.html although there are others available. There are links on the page to explain scale lengths, which I found useful on my first build. Once you have the measurements I would advise measuring each fret from the nut rather than measuring the distances between frets. If you measure from fret to fret and mess one up, then they are all messed up from that point onwards! Also, check and double check the measurements (and then check again) before you cut!

Thanks for the info! Do you know why 24.5" is basically a set standard on CBG templates? Should I cut down my neck to achieve this length???

I've used the Stewmac fret calculator for most of my fretting jobs. Very easy to use, but you still need to take care when measuring and marking.

http://www.stewmac.com/freeinfo/Fretting/i-fretcalc.html

On my last build I used a pattern you can use from the Handmade Music Factory book. There are a number of scale lengths (the measurement from nut to bridge), that should work for you.

http://www.amazon.com/Handmade-Music-Factory-Foot-Stompin-Good-Inst...

C.B. Gitty has some fretting advice available here http://www.cbgitty.com/?p=154

I'm not sure what you might be able to do to rescue the neck you're working on, but someone else might have some ideas and advice.

I hope I've been of some help.

Awesome! One mor question. What scale am I using? Acoustic, dulcimer, banjo...?

I find that when doing Cigar Box Guitars, the banjo scale is usually the most accurate. That's because most CBG bridges function similarly to banjo bridges. To make sure the bridge is located in the right position (after you've fretted and strung it up), use a tuner to make sure the string is in tune. Very lightly touch the string directly above the 12th fret and pluck the string. You should get a nice, clear, bell-tone called a harmonic. Make sure your tuner is reading this as "In Tune." If not, tune it so it is. Then fret the sting at the 12th fret as if you were playing and check the tuning again. If the note is still in tune, you're good to go. If the note is sharp, you will need to move the bridge further from the fingerboard. If it is flat, you will need to move it closer to the fingerboard. Repeat this process in small increments until you're happy. If you're using a one-piece bridge, you will likely not get all of the stings perfect. Do your best! 

You should also check out the Scale Lengths, etc. group. I understand it was established by a brilliant man to answer these types of questions...

I did a short beginner's video on how to fret a neck, you can find it on my personal page here. I also have some pre-defined fret templates in PDF format that I could send you if you wanted. You just print them out and tape them to your fretboard.

 

Dan

I appreciate it! If you don't mind, I would like to get those templates from you. I'll post some pics of the project soon

You should have them now. Hollar if you have any questions.

banjo, guitar, mando, none will be any more accurate than any other, they all use a mathematic formula called the 'rule of 18' (actually closer to 17.817..)

if you got an iPhone theres a couple calculators on the app store, the best one by far is called 'JeFretCalc', its free and was coded by a member of this site

This is the only way to do it.

http://www.cigarboxnation.com/profiles/blogs/measuring-frets-the-ea...

I print the template from WFret software for my desired scale and use spray 3m77 glue to attach it to the fingerboard stock.  I cut the slots right through the paper template.  Works perfect every time. 

http://www.harpkit.com/mm5/merchant.mvc?Screen=PROD&Store_Code=... Best tool for a builder !!! i`ve turned so many builders on to this fret chart i`ve lost count. Scales from 13" to 31" all fret marks just line up the fretboard to the scale you want to use and copy the the lines. I`ve had my chart goin on 20 years...it`s dead on. it`s a big heavy paper chart..2' x 3' i have mine mounted on a piece of 1/4" panel. Wish i could stick this link where all the builders could see it...i must have threw it on fretting discussions for a few years now...yeah check it out...cheap price for a very useful tool.

I really wish they had a better pic up on the site.  Any way you could post a pic? 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
14 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
14 hours ago
Kent Thurston updated their profile
15 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
15 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
15 hours ago
Poorness Studios liked A.D.EKER's video
17 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
17 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
20 hours ago
A.D.EKER commented on A.D.EKER's video
23 hours ago
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
yesterday
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->